Scrubber Industrial Floor Cleaning Equipment
XR Industrial Rider Floor Scrubber
Our customers asked us to build a highly productive rider scrubber that could make U-Turns in 7 seven foot aisles, but at a budget conscious level. The XR battery rider scrubber / sweeper combination machine has 68 gallon tanks and scrub paths from 34” up to a whopping 46”. This combination permits the scrubber operator to clean large areas without making frequent trips back to drain and refill the tanks. The cylindrical or disk scrub decks offer the flexibility to scrub smooth epoxy, concrete, rubber running tracks, or the grout lines of ceramic tile. As a battery powered scrubber / sweeper machine, the dual side brooms extend the sweeping up the edge of the walls and underneath racking.
The XR battery scrubber is an “industrial” scrubber, designed for use in warehouse or metal fabrication facilities. The scrub decks can be protected by the HD side doors, and the rider scrubber comes with a rear bumper standard to protect the squeegee from collisions in reverse. A long list of standard items on the Factory Cat XR scrubber are options on other brands like, dual vacuum motors, deluxe seat, adjustable steering column, dual headlights, horn, backup alarm, to just name a few.
The rider scrubber’s side wipers and efficient squeegee design ensure the XR battery scrubber delivers optimum water control and recovery on turns. The scrubbers’ recovery tank is fully accessible, for easy cleanup and sanitization. All components are made of heavy gauge steel, and attached with stainless fasteners to simplify any maintenance.
Factory Cat XR rider scrubbers’ tanks tip back for easy “top side” access to all the regular maintenance items, like the stainless solution filter, the vacuum motors, squeegee actuators, solution valve and more. Further easing any scheduled maintenance in the future, the XR scrubber uses only stainless fasteners, hinges and like a quality boat, all fasteners are through bolted for a stainless to stainless connection. Available with the following six scrub head sizes / configurations:
XR Industrial Floor Rider Scrubber Choices Available
Rider Disk Industrial Floor Scrubbers
- XR 34” Disk Rider Scrubber
- XR 40” Disk Battery Rider Scrubber
- XR 45” Disk Rider Floor Scrubber
Rider Cylindrical Industrial Floor Scrubbers
- XR 34” Rider Scrubber/Sweeper Combination
- XR 40” Cylindrical Battery Sweeper-Scrubber
- XR 46” Scrubber Sweeper Cylindrical Floor Scrubber
XR Rider Battery Floor Scrubber Downloads
XR Industrial Rider Floor Scrubber
XR Industrial Rider Floor Scrubber Techspecs
For more information, or to schedule a free demonstration of any of our floor care cleaning equipment in your facility: Contact Us
Industrial Scrubber, and Sweeper Machine Choices
Industrial Battery Floor Sweeper
This walk behind, battery sweeper has been an industry leader for more than a decade. Its sweeping prowess and durability has been proven in many of the worlds’ most challenging floor sweeping environments. You’ll find these sweepers cleaning in mines, metal fabrication facilities, bulk powder packaging, wood mills, and more. The Model 34 sweepers' all steel construction, direct throw sweeping and "baghouse" filter differentiate it from all the plastic (commercial) sweepers on the market.
A compact rider sweeper, but with the performance of sweepers twice its size. The TR is a maneuverable sweeper, with good visibility and priced below other sweepers in the category. Similar to our Model 34 sweeper, this battery sweeper is all steel construction and built to perform in dusty applications. The TR rider sweeper can clean 60,000 square feet / hour, and for over 7 hours on a single charge. The onboard charger is fully automatic and allows customers to recharge the sweeper at any outlet. The TR sweeper is able to sweep up sand, fine powders, leaves, rocks, nails and all into a simple to empty hopper. Both the Model 34 sweeper and this TR rider sweeper are built with a filter that typically lasts the life of the machine, saving customers potentially thousands of parts $$ in the future.
Walk Behind Battery Industrial Auto Scrubber
The Factory Cat MiniMag industrial scrubber blends a compact floor scrubber with the toughness that is not found on other brands of battery scrubbers. With 17 gallon tanks and scrub paths from 17" up to 26", the MiniMag can be configured to meet your scrubbing needs. Both disk and cylindrical scrubbing heads are available on the MiniMag Scrubbers, allowing customers to sweep and scrub in a single pass. Factory Cat uses the same HD scrub motors from the larger Magnum scrubber, on this smaller MiniMag auto scrubber. The Factory Cat walk behind scrubber is able to scrub into congested areas and is ideal for Car Dealerships, congested machine shops, food preparation areas and anyone looking for high performance scrubbing in a compact and affordable package.
Factory Cat’s larger Magnum scrubber combines 30 gallon tanks and seven different scrub decks. Available with 24" on the small end up to 34" on the large end, they can be equipped with the popular sweeper/scrubber combination, also known as a scrubber/sweeper. This cylindrical head can conveniently sweep and scrub in a single pass, saving customers the grief of clogged squeegee hoses and reducing the need to pre-sweep. The Magnum scrubber, and all Factory Cat scrubbers, have tanks that tip back for easy access to all service items. Accommodating the natural scheduled maintenance on the scrubbers and sweeper/scrubber combos, encourages long life and customer satisfaction.
Rider Battery Industrial Auto Scrubber
For customers who are not willing to accept any compromises with their scrubbers or sweeper/scrubbers. The GTX rider scrubber is effectively smaller than most walk behind scrubbers. While smaller in footprint, the GTX battery scrubber packs in 35 gallon tanks, 6+ hours of run time and scrub paths from 24" to 34". Like all Factory Cat scrubbers, the GTX can be built with the labor saving cylindrical head, for sweeping and scrubbing in a single path. The optional side brooms permit sweeping under racking, along the wall.
Our largest rider scrubber, the XR battery scrubber is designed with 68 gallon tanks, and scrub paths from 34" up to a massive 46". The efficient design allows our scrubber to U-turn in 7’ aisles and be optioned up with 85 gallon stainless tanks and dual side brooms for sweeping up to the edge. The XR rider scrubber, like the smaller GTX scrubber, is built with operator comfort in mind. It offers superior scrubbing performance and like all Factory Cat scrubbers, is built with stainless fasteners, powder coated steel, and all maintenance components are placed for easy access. XR scrubbers are popular with food distribution facilities, companies in the Tech sector, and any industrial or fabrication plants. The scrubber’s large tanks and battery set allow customers to scrub up to 250,000 sq. ft on a single charge. Onboard soap, overhead guards, non-marking tires and remote floor cleaning tools are just a few of the options available.