Due to shipping restrictions used machines are only available for domestic U.S.A. delivery. All used machines come with a 18 month parts only warranty.

Just up a model 40 located in Fredericksburg VA. Serial number 40-6308 jicba Factory Cat HD40 disk deck with 502.6 hours on it in very good condition.
Serial number 46761-abeee located in Salt Lake City. Here is a Factory Cat 350 cylindrical battery scrubber with 35" cleaning width poly tanks, built in 2006 with only 120 hours on it. Hurry and get your excellent condition used 350 scrubber!

Nice pair of Model 40 scrubber/sweepers serial numbers 40-6708-jihej, and 40-6614-jihej these are practically twins 420 hours on one and 475 on the other. Both were made in 2001 have a 38" cylindrical cleaning path, battery powered, poly tanks and in excellent condition. Located in Salt Lake City.

Model 48 Sweeper Serial number 48-4864-jejaj located in Arnold Missouri. Good condition used 48 floor sweeper at a machine shop. Only 188 hours on it and in great working order, HD package and 2 new batteries replaced not to long ago.

How can we sell this as used?! A Magnum 26" floor scrubber with .3 hour, .3 drive, no brush time, and only .1 vacuum used for just testing. Condition on this used scrubber is great, don't hesitate because this one isn't going to last long.Serial number 55596-jgcff located in Racine WI.

We have a 200 traction drive floor burnisher that was never truly used, just taken to trade shows. Getting many ooohhhhh's and awwwwww's it's time for this machine to start working for someone. Only 2.3 hours on the meter, but that was only used to get the floor burnisher to the booth that we were showing it. Don't miss out on a great new "used" machine.Serial number 55267-jeedf located in Racine WI.

270 traction drive floor burnisher with 96 hours. The floor burnisher looks great and works even better! This machine was hardly ever used but might have had a night or two where someone forgot to turn the key to stop the hour meter from running up. Thats the great thing about battery powered burnishers all the power and much less noise.Serial number 54869-jefaf located in Racine WI.

Used floor burnisher 1 of 2. Buy the set or break them up, the burnishers are identical in build and condition. Features on this are active dust control, deck tilt (added after we took them in for trade). So this used floor burnisher has even more then when it was sold, sounds like a great deal to me, call or click for more info on this used floor burnisher. Serial number 46261-jehig located in Racine WI.

Serial number 55441-jefja located in Racine WI. Don't miss the chance to snatch this hardly used battery floor burnisher! Only 12 hours on the meter, that does not the actual burnishing time, just the time the key has been turned on. I can tell you that this machine is the equivalent to a little old lady driving to church and the grocery store. Comes with 12 month warranty on parts, hurry won't last long!
We have many more used floor scrubbers and sweepers but just can't update as often as we like to so if you don't see anything you like or have questions about the used floor scrubbers and sweepers listed here call 1(800)634-4060 or contact us.
This walk behind, battery sweeper has been an industry leader for more than a decade. Its sweeping prowess and durability has been proven in many of the worlds’ most challenging floor sweeping environments. You’ll find these sweepers cleaning in mines, metal fabrication facilities, bulk powder packaging, wood mills, and more. The Model 34 sweepers' all steel construction, direct throw sweeping and "baghouse" filter differentiate it from all the plastic (commercial) sweepers on the market.
A compact rider sweeper, but with the performance of sweepers twice its size. The TR is a maneuverable sweeper, with good visibility and priced below other sweepers in the category. Similar to our Model 34 sweeper, this battery sweeper is all steel construction and built to perform in dusty applications. The TR rider sweeper can clean 60,000 square feet / hour, and for over 7 hours on a single charge. The onboard charger is fully automatic and allows customers to recharge the sweeper at any outlet. The TR sweeper is able to sweep up sand, fine powders, leaves, rocks, nails and all into a simple to empty hopper. Both the Model 34 sweeper and this TR rider sweeper are built with a filter that typically lasts the life of the machine, saving customers potentially thousands of parts $$ in the future.
The Factory Cat MiniMag industrial scrubber blends a compact floor scrubber with the toughness that is not found on other brands of battery scrubbers. With 17 gallon tanks and scrub paths from 17" up to 26", the MiniMag can be configured to meet your scrubbing needs. Both disk and cylindrical scrubbing heads are available on the MiniMag Scrubbers, allowing customers to sweep and scrub in a single pass. Factory Cat uses the same HD scrub motors from the larger Magnum scrubber, on this smaller MiniMag auto scrubber. The Factory Cat walk behind scrubber is able to scrub into congested areas and is ideal for Car Dealerships, congested machine shops, food preparation areas and anyone looking for high performance scrubbing in a compact and affordable package.
Factory Cat’s larger Magnum scrubber combines 30 gallon tanks and seven different scrub decks. Available with 24" on the small end up to 34" on the large end, they can be equipped with the popular sweeper/scrubber combination, also known as a scrubber/sweeper. This cylindrical head can conveniently sweep and scrub in a single pass, saving customers the grief of clogged squeegee hoses and reducing the need to pre-sweep. The Magnum scrubber, and all Factory Cat scrubbers, have tanks that tip back for easy access to all service items. Accommodating the natural scheduled maintenance on the scrubbers and sweeper/scrubber combos, encourages long life and customer satisfaction.
For customers who are not willing to accept any compromises with their scrubbers or sweeper/scrubbers. The GTX rider scrubber is effectively smaller than most walk behind scrubbers. While smaller in footprint, the GTX battery scrubber packs in 35 gallon tanks, 6+ hours of run time and scrub paths from 24" to 34". Like all Factory Cat scrubbers, the GTX can be built with the labor saving cylindrical head, for sweeping and scrubbing in a single path. The optional side brooms permit sweeping under racking, along the wall.
Our largest rider scrubber, the XR battery scrubber is designed with 68 gallon tanks, and scrub paths from 34" up to a massive 46". The efficient design allows our scrubber to U-turn in 7’ aisles and be optioned up with 85 gallon stainless tanks and dual side brooms for sweeping up to the edge. The XR rider scrubber, like the smaller GTX scrubber, is built with operator comfort in mind. It offers superior scrubbing performance and like all Factory Cat scrubbers, is built with stainless fasteners, powder coated steel, and all maintenance components are placed for easy access. XR scrubbers are popular with food distribution facilities, companies in the Tech sector, and any industrial or fabrication plants. The scrubber’s large tanks and battery set allow customers to scrub up to 250,000 sq. ft on a single charge. Onboard soap, overhead guards, non-marking tires and remote floor cleaning tools are just a few of the options available.
| Industrial Battery Floor Sweeper | Industrial Battery Floor Scrubber | Industrial Battery Floor Scrubber/Sweeper |
|---|---|---|
| 34 Walk-Behind Battery Floor Sweeper | MiniMag Walk-Behind Battery Floor Scrubber | MiniMag Walk-Behind Battery Floor Scrubber/Sweeper |
| TR Rider Battery Floor Sweeper | Magnum Walk-Behind Battery Floor Scrubber | Magnum Walk-Behind Battery Floor Scrubber/Sweeper |
| GTX Ride on Battery Floor Scrubber | GTX Rider Battery Floor Scrubber/Sweeper | |
| XR Ride on Battery Floor Scrubber | XR Rider Battery Floor Scrubber/sweeper |
© 2009 R.P.S. Corporation. All rights reserved.